Saving water and maintaining plumbing in top condition are two essential and basic concerns of homeowners today. With that said, there are a number of things that homeowners can do to save water and improve overall plumbing reliability. For example, homeowner should strive to avoid using excessive amounts of chemicals, bleach or detergents. These products are known to interfere with a septic system and they are simply not good for the environment.
As an alternative, many homeowners choose to use biodegradable detergents and soaps. These products are safer for the environment and less abrasive to a typical home septic system. An excellent way of conserving water is to avoid watering the lawn and landscaping excessively during the summertime. It is far better to purchase an inexpensive spring-loaded type of timer that attaches to an outside faucet. This can limit the amount of watering if a homeowner forgets to shut off a sprinkler system.
Equally important is to check home water pressure. In most cases home water pressure should be established at around 60 pounds per square inch. Anything more than this can cause damage to a home plumbing system. In addition, excessive water pressure can result in a lot of water usage. In instances where water pressure coming from the street exceeds 60 pounds it is recommended to install a pressure-reducing valve. This will help to limit the amount of water pressure that is exerted on pipes throughout a home. Another excellent way of reducing water usage is to check the water meter when all water is turned off around the home.
Installing A New Toilet Flapper
If the water meter is still running when all water has been turned off this may indicate that there is a leak somewhere in the system. One of the best options in this regard is to hire an experienced plumbing contractor to find the leak. It is a well-known fact that a leaky toilet can greatly increase total water usage on a monthly basis. Something as simple as installing a new toilet flapper and fill valve can keep a toilet running in the most efficient way possible. As a final note, a home water heater should always be set at 120°F so as to save energy and prevent possible scolding or injury. Contact Parker & Sons today to learn more about a Phoenix plumbing contractor with years of experience in the industry.